Getting started
Reference
Guides
Connect to the node directly to your computer without a switch or router.
You will need:
| Quantity | Item |
|---|---|
| 1 | ethernet cable |
Once you have turned the node on, connect it to your computer with an ethernet cable. Plug one end of the ethernet cable into your computer, and the other end into the port on the back of the node based on the instructions provided by DigitalGlue for your specific system.
<aside> 📢 TIP
If your computer does not have an ethernet port, you can use a USB 3 to 1000Base-T Ethernet adapter to connect it to your node.
</aside>
<aside> ⚠️ WARNING
Do not use a 10Base-T or 100Base-TX adapter to connect to the node. These adapters might not work.
</aside>
<aside> ⚠️ WARNING
Each node has an ethernet port that is reserved for hardware diagnostics. Do not connect to this port unless a creative.space support technician specifically instructs you to do so.
</aside>
Every creative.space node has a management interface that you can access with your web browser. Navigate to creativespace.local to access it. Then, log in with the administrator credentials you received along with the node.
<aside> 📢 TIP
If your node was pre-configured by creative.space support, then you might need to go to a different URL to access it. Contact contact creative.space support if you need assistance connecting to your node.
</aside>
https://player.vimeo.com/video/504989143
← Previous
Next →
On this page